 |
| |
Kitesurfing Guide » |
 |
Want to learn more about kitesurfing?
Why aren't you kiting?
Kiting will alter your life. There’s no other sport that allows you to get as
much air and learn tricks so fast. Kiteboarding takes the best of windsurfing,
wakeboarding, snowboarding and paragliding and combines it all into one insane
sport. There’s no other feeling like being fully lit while riding on the water.
If you haven’t tried it yet, start kiting today. You’ll thank us for a new
lifestyle and addiction.
Take Lessons.
Lessons are the fastest, easiest, and safest way to begin kiteboarding. Even if
you consider yourself highly athletic in other sports, you’ll want to take
lessons prior to purchasing a kite. Given the right instruction, learning to
kite is easy and safe. Most people don’t want to spend the extra money on
lessons, but given the extreme power of the kite, you endanger yourself and
others by not. The cost of lessons varies, but professional advice and
instruction is worth more than the monetary cost involved. Typically hourly
rates are around $30-$45 depending on whether you use your own gear or rent,
and daily and package rates are a little less expensive.
What should I buy?
We use specifically designed gear for learning. School kites are easy to handle,
and the boards are forgiving and buoyant. Let your first experiences with kiting
be fun. To help you get up and going we have created a beginner package just for
you. Once you have completed your course, we have a special package deal just
for you! Buy a kite complete with bar and lines, a board and a harness of your
choice as a package deal. Everything you need to start riding as soon as
possible!
The Learning Stages
It is vital to take a lesson as there are a lot of safety steps that are
essential to learn and ensure kiting is safe and fun and for everyone around
you. The following information is to show you what you can expect from a lesson,
and is not intended to replace or provide one. Also, use an IKO instructor to
gain the best possible advice.
1. The Trainer Kite
The first thing to do to get into kiting is learn how to fly a kite. The safest
and easiest way to get started is to spend 20–50 hours on a trainer kite. A
trainer kite is usually a 1-2m foil kite. That may seem like a lot of time,
but it’s much easier to learn the lessons and get to the point where flying a
kite becomes second nature on a trainer kite than on a powerful inflatable kite.
2. The Wind Window
With the trainer kite you will need to figure out how to get the kite into the
neutral positions along the “wind window”. If your back is to the wind, the wind
window is the arc that extends from your left side to your right side, with
directly overhead being the middle and "neutral position". This neutral zone is
necessary for launching and landing and it is essential to be extremely
efficient in getting the kite there and handling the kite in the neutral wind
window. You want to be able to get the kite to neutral as quickly as possible
from any possible kite location in the sky.
3. The Power Zone
Once you’ve mastered the neutral zone it is time to start getting the kite into
the power zones. A good way to generate power is to dip the kite from the 11 to
7 clock positions in a figure 8 motion. Then to do the same figure 8 motion on
the other side from the 1 to 5 clock positions. This motion is called your power
stroke as you bring the kite through the power zone where the kite is most
powerful. This power stroke is the same motion that you will use while body
dragging, getting up on the board and then when you’re up and riding on the
board.
4. Other Exercises and Practice
Once you’ve gotten efficient at generating the power stroke you’re a few more
steps away from doing your first body drag. It’s a good idea to spend a lot of
time flying the kite one handed, backwards and with eyes closed as these are all
situations that will occur while out on the water and it’s better to figure out
how to recover with a 1-2m kite than a larger one. Try to put yourself in every
possible situation and get efficient at bringing the kite to neutral. After
you’ve spent 20-50 hours with the trainer kite, flying the kite will become
second nature, so rather than thinking about flying the kite you can focus on
other things, like where you’re going and trying to get the board on your feet.
5. Depower or Flag Your Kite
Now that you’re efficient at flying the kite it’s time to learn water safety.
The first important lesson to internalize is how to completely depower the kite.
Depending on the bar and system, the methods can vary. In general you want to
have the reflex or instinct to “throw your bar” if you’re in any kind of trouble
or uncomfortable. On every bar that motion should completely depower the kite.
Depending on the system, and especially if you have the SHIFT system, you should
be able to quickly recover and get ready to water relaunch.
6. The Water Relaunch
Throughout your kite-life you will undoubtedly spend countless hours relaunching
your kite. Some kites will relaunch better than others and there are systems now
to aid this process. Depending on the wind and the kite it can be an incredibly
frustrating process or it can be a non-issue. The basic idea is while the kite
is floating on the water, it will tend to retain it’s shape due to the
inflatable structure and it will make it’s way downwind of you sitting on it’s
leading edge, pulling downwind. Once it’s in this position you have to get the
kite to flip on it’s back, either by swimming at it and relieving the tension in
the back lines, or by pulling on the center lines with the SHIFT system. However
you get the kite on its back, once it’s there you need to pull on one side and
allow the kite to fill with air creating a “C” formation. Once in the “C” shape
it should be easy to fly it out of the water. This is a technique that takes
quite a bit of practice and even an experienced relauncher can have issues if
there is current in the water or not enough wind. It is best to have a teacher
show you the process and then spend a lot of time getting the technique down
before going out and having to swim in.
7. The Body Drag
Now that you’re a good kite handler, you’ve learned all the ways to depower and
release your kite, and you know how to get the kite relaunched, you’re probably
ready to go on your first body drag. If you have someone who cares about you and
is an experienced kite handler it is nice to have them do a tandem drag, where
they hold onto your harness handle and talk you through the process. If you
don’t have anyone like that and are anxious to get going, have your teacher
watch you and be prepared to come get you downwind, because you will be going
downwind. If you’re unfamiliar with sailing terminology you now need to learn
the term “tack” because that’s what you’ll be doing. You will be tacking
downwind in a zigzag motion. You will be generating your power strokes one side
to go one direction and then on the other side to go the other direction. Keep
the kite movements slow and have two thoughts in your head: 1. How to quickly
get to neutral 2. How to immediately depower your kite and/or quick release
8. Body Dragging Upwind
Now that you’re up and riding and having a blast, it’s time to learn how to body
drag upwind so that you don't lose your board. Learning this is essential as we
don't recommend using a board leash at all. If you wipe-out and are separated
from your board, or if the wind is light and it isn't possible to get going on
the board and kite home, body dragging is your only option. To body drag upwind
you need to learn how to use your arm like a rudder to edge against the kite and
use the power of the kite to go upwind. To do this, point your leading hand
upwind and try to lay your body perpendicular to your kite lines. Stretch out
and use the length of your body as resistance to the kite. It is the same
technique that you use with the board on your feet to go upwind and it may take
a little while to learn, but make sure you know this before you go out in deep
water. Try doing the body drag while holding the board (in an edging style,
weight on windward rail) in your pointing/leading hand. It will give you the
ability to tack up wind in sub 10 knots. Learn this for light winds and if the
wind turns offshore. Once you’ve mastered this, you’re ready to venture safely
almost anywhere.
9. Getting up on the Board and Riding
After you’ve done a number of body drags and are feeling confident with your
kite skills, you’re ready to start getting up on the board. Contrary to most
preconceived ideas, you don’t have to have prior board riding experience. The
kite’s upward pull and the general dynamics should make riding the board pretty
easy. It is best to have a bigger board while starting as you will require less
power from the kite to get going. It is also important to wear a helmet and have
all your safety techniques down pat. It is a very exciting day when you can kite
back to the same place you launched, this is when you can officially call
yourself a kiteboarder - now it’s time to buy 5 kites, 2 boards and way too many
expensive accessories.
FAQ
What is a Kite?
Kites take two basic forms, foils and inflatables. Foil kites look like
parachutes and are mostly used on land for training, but may also be used on the
water. Inflatables are the large arc shaped kites generally used in
kiteboarding. They work much better in the water as the inflatable structure
allows for flotation and relaunching. Kites are also classified by line
configuration, 2-line or 4/5-line. Kites with 4/5-lines have the ability to
depower, while 2-line kites do not. 4/5-line kites are most commonly used for
today’s kiteboarding as they offer a greater range of power. 2-line kites are
often used in the instructional phases of kiteboarding due to their simplicity.
How many kites do I need?
Because this sport is wind dependant, it is very hard to predict which kites
will be most appropriate for any individual, plus whenever you buy a new kite it
blows too hard or not enough! Murphy's Law # 45. The sizes of your quiver
depends on where you’ll be kiting, your body size and which board you’ll be
using. An ideal quiver would consist of 3–4 kites, with a smaller kite for the
high wind days and a bigger kite for light wind days. Someone living in an area
which averages 25 knot winds and who is 70kgs might have a 8.0m, an 10m, and a
14m, whereas someone in an area that gets lighter winds on average, might have
an 12m, a 16m and a 20m. It really depends where you’ll be kiting and your
individual specs. It’s a good idea to talk to the locals and research the
average conditions before buying a quiver. You can get by with only 1 kite,
which should be the average kite for average winds. In Lebanon the best size is 10m-14m.
Should I use a waist or a seat harness?
That is mostly a personal preference. It is a good idea to try them all and see
which you find most comfortable. For people who have back problems, often a seat
harness is more comfortable as you can use your lower body weight and rear-end
to push against the kite and hold it down. The impact harness adds the benefit
of upper body protection. In general, most women prefer seat harnesses, because
with a lower center of gravity it easier to hold down more kite. The waist
harnesses often ride up to where women’s waists are narrower and can be
uncomfortable, especially so when body-dragging. Overall, waist harness are the
most commonly used harness.
How do board size and rider weight affect the suggested wind range rating of a
kite?
Many factors affect the wind range of a kite such as board size, rider weight,
riding ability and riding style (super lit or just powered). Each of these
factors can adjust the recommended wind range for a particular kite. The general
idea is that the bigger the board and the lighter the person, the smaller the
kite that is needed. The basic idea behind rider weight and wind range is that a
heavier rider, in general, will shift the wind range up. A kite that has a wind
range of 20-30 knots for a 75 kilo rider might have a 25-35 knots range for a
100 kilo rider, simply because the extra mass requires more wind to get low-end
planning and allows the rider to "hold down" more wind on the top end. The basic
idea behind board size and wind range is that a smaller board will shift the
wind range up. A smaller board requires more pull from the kite in order to get
planning and a larger board requires less pull for early planing and the wind
range shifts down. In general, it is easier to become overpowered on a larger
board because it is harder to hold an edge. Published wind ranges are a rough
guideline and everyone must take into consideration their weight, board length,
riding ability, and local wind conditions, when selecting a kite.
What is the difference between low, med and high aspect kites?
The kite aspect ratio is essentially the length from wing tip to wing tip to
overall surface area. Thus, the higher the aspect ratio the longer or skinnier
the kite is. The higher the aspect of the kite, the more powerful and the
loftier it is. As a beginner, you want to start with a low aspect kite that has
more range and is more forgiving with less sustained power. Typically
intermediate riders prefer a medium aspect kite but it becomes a matter of
personal preference and riding style.
To SHIFT (5th Line) or not?
The SHIFT, 5th line, provides additional depower, safety and makes relaunching
more efficient, why wouldn’t you use it? It is a bit more complicated and one
more thing to learn, but it was designed to improve the bar system and your
kiting experience. Also, most of the new Naish kites are 5th line dependant.
Through usage of the 5th line, the kite's leading edge is able to be narrower
and this makes the kite a lot quicker through the air. Kiting has come a long
way over the last few years, in fact kites from 2-3 years ago have become
somewhat obsolete as new features and systems are designed. Take advantage of
the time taken in researching and testing that has gone into making kiting safer
and easier, by using the SHIFT system. It simply requires one more line
attachment during setup and adds so much in terms of safety and ease. It is
definitely worth investing the time to figure it out. Plus it works every time
unlike other systems on the market.
How does line length affect kite performance?
Shorter lines bring the rider closer to the kite which gives the kite faster
handling and less power. Shorter lines are safer in high traffic areas due to
the reduced distance between the rider and the kite. Additionally, shorter lines
are better for wave riding and riding overpowered because of the faster reaction
of the kite. In contrast, longer lines give the kite slower handling and more
power. Additionally, due to a larger power stroke, longer lines generally allow
for more hang time. 24m Lines are the preferred length on most kites.
What is the SHIFT fifth line? Why do I need it?
The fifth line system, or SHIFT,
is designed to allow you to completely depower your kite, without getting all
your lines tangled as you would have with a traditional kite “flag”. When
learning or in a situation where you’re out of control, the usual method is to
“throw the bar” which engages the one line leash system that flags the kite and
typically ends the session as the lines get tangled. With the fifth line, the
kite is completely depowered but all 4 flying lines should remain in tact
allowing for a quick and safe recovery. It is also useful when relaunching as it
eliminates the need for swimming. The SHIFT system also allows for efficient and
safe relaunching without the need to swim like the 100m relay team! Reach above
the depower strap and pull it a few times to flip the kite onto it's back. Once
it is on it's back, the kite can be relaunched. The bonus of the SHIFT system
versus another relaunch system is simple, it works, even with slack lines!
I can’t reach the depower strap, how can I customize the bar so that I can?
To adjust the length to reach the depower strap, you need to untie the bowline
knot at the end and readjust it. Be careful to fully secure the new knot. In
order to compensate for shortening the center lines you need to leave the center
lines adjustment on the last knot. The center lines will stretch after ten or so
uses so whereas normally you would move the center lines down a couple of knots,
in this case you leave them on the last knot. If the center lines are still too
short relative to the rear lines you can add a pigtail or small extension to the
end of them. If you do not know how to tie a Bowline knot, search the net or
head into your local Naish dealer.
How do I set up my board/footstraps?
When you first get your board you have to set up your footstraps to fit you. The
best way to install them is to screw in the footstrap screw that is closest to
the center of the board with the footstrap spun around 180 degrees first. Once
that screw is started, spin the pad around to its correct position. Be sure to
screw the screws in straight. If they’re screwed in on an angle you will
probably strip the insert and that insert will be useless. Also, be sure not to
over tighten the screws. Then the question, "Wide or Regular stance?"
Which board is best for me?
Some of the variables to consider are body size, conditions, skill level and
spot (waves vs. flat water). The short answer is the smaller the person, the
stronger the wind and the greater the skill, the smaller the board. In contrast,
longer boards provide more floatation for larger riders or lighter winds. Ask
your friends, the local shops or check out what the pros are using. In the end,
board selection depends on personal preference and riding style.
Should I kite Alone?
While kiting can be done alone it is better to have someone to help you launch
and land your kite and keep an eye on you while out on the water. As kiting has
become increasingly popular it is much easier now than it used to be to find
others to kite with. Self-launching and landing are techniques are important to
learn, because there may not always be someone around. These practices done
improperly can be extremely dangerous so make sure you know how to do them
safely. The SHIFT system makes self launching and landing a lot easier, and
definitely safer.
Are there any signals that I need to know while on the water?
One good signal to know is the “catch my kite” motion. To indicate to someone on
the beach that you’d like them to catch your kite the signal is patting the top
of your head. Pat the top of your head a few times to ask someone to catch and
land your kite. Also then launching, giving the "Thumbs Up" sign tells the
person holding your kite to let go.
Do I need to be super strong?
Although it looks like you might, you really don’t. Kiteboarding is more of a
finesse sport than a strength sport. This is because the harness you wear allows
you to use a lot of your body weight to hold the kite and “harness” the kite’s
power, versus arm strength. However, you definitely need to be a strong swimmer
and in good shape, not necessarily to kite but in the event that something goes
wrong and you have to swim back. Although it doesn’t require a lot of strength,
kiting a lot will get you in good shape both mentally and physically!
GLOSSARY
Kiteboarding: using a kite on the water in conjunction with a board, sick!
Leading Edge Inflatable (LEI) Kite: Kite with inflatable struts, normally half
circle or arc shaped.
Bladder: Inflatable plastic tube that fits inside strut housing, like a bike
tire. Bladders give the kite structure and shape and most importantly help it to
float.
Chicken Loop / Quick Release Trim Loop (QRTL): plastic quick release loop used
to control the power of a kite when hooked in to the harness. Available for 5 &
4-line kites.
Trainer Kite: kite suitable for practice on land to simulate kiteboarding,
normally smaller than 3 meters squared.
Arrrgggghhhhhh shhhhh*********T!!!!!!!!!! - a kite loop gone wrong!
Flying Lines or Kite Lines: 2 or 4 lines attaching the kite to the leader lines.
OCTOPUS - The single point inflation system from Naish. More
Leader Lines: Thick lines that attach flying lines to control bar. These are
essential to reduce risk of line cuts.
Depower or Sheeting Out: Gust control. Reduces power of the kite, by pushing the
bar away from you.
Power up or Sheet In: Increases power of the kite, by pulling the bar towards
you.
Harness: Attaches the rider to the kite. Transfers the pulling load of the kite
to the entire body. Can come as waist harness or a seat harness. Seat harnesses
are better for learning.
Overpowered: Using a kite size too big for riders weight and skill. This is
extremely dangerous and or fun!
Underpowered: Opposite of overpowered, can be avoided by using a bigger board or
a bigger kite.
Upwind: Where the wind is coming from.
Downwind: Where the wind is going.
Reach: Sailing across the wind direction.
Gust: A period of stronger wind than normal.
Lull: A period of lighter wind than normal.
Knot: A measure of wind speed.
TIPS
Every time you use your kite, make sure you deflate all of the struts and pack
away dry. This will prolong the life of the valves and bladders, plus if the
kite is put away wet, the dark inks on the kite could run. After all, most Naish
kites have the Octopus inflation system and this is really easy to inflate, so
no excuses!
NEVER leave your kite inflated and fluttering on the beach. Every minute the
kite sits on the beach is equal to about an hour off it's life. The trailing
edge will become frayed and the sun's UV will harm the integrity of the kite. If
you have finished kiting, pack up your kite. If you are coming in for lunch,
deflate the leading edge and secure your kite so that it is not going to blow
away. In time, you will appreciate this.
Always check your safety systems before each session. Make sure your Quick
Release Trim Loop is not stuck or broken. Push away and release and reload
before each session provides you with the peace of mind that your chicken loop
is in working order.
Wash your bar and lines with fresh water, and brush all of the sand from your
kites. You needn't wash your kites often as sea water is not bad for them. If
you have been using them in a duck pond, it is good to wash them off. You do not
want mildew.
Check your lines for knots. Knots make flying lines a lot weaker and you do not
want one breaking on you during a session. If you have a knot, use hair
detangler to loosen the knot and unpick it. But be careful not to damage the
lines. These lines are expensive.
SUGGESTIONS
If you have any good TIPS, please send them through to
info@kitesurflebanon.com
|
|